Delivered Free in India

Search

Need help? 0091 - 96502 56987- Xcem3D- 000

10 in stock (can be backordered)

x3d dip lac

DIP
Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath.
Efficient use in the lab, contains no toluene.
Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa

£28.00£50.00

Clear
SKU:xc3-100-1-1-1-1-1-1-1-2-1-1-1-2-1-1

 

Auflex XLB:
General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip.
Excellent detail reproduction, tensile resistant with high elastic recovery.
Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible.
A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I,
Colour: light blue

shade

A1, A2, A3

size

500ml, 1000

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

x3d model extra hard

£28.00£50.00
(0 Reviews)
3D DENTAL PRINTING RESIN- Light Cure Indicated for model making, working and lab models. good  Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . MMfree. Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: ivory, blue, grey Property Unit measurement Result Flexural strength MPa > 75 Flexural modulus MPa > 1400 Hardness Shore D > 85  

x3d auflex supra

£28.00£50.00
(0 Reviews)
Auflex XLB: General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip. Excellent detail reproduction, tensile resistant with high elastic recovery. Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible. A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I, Colour: light blue

x3d cast separator

£28.00£50.00
(0 Reviews)
use: Separating agent for CAS TINGS/Casting Mould Properties: Dipping solution,Efficient use,Easy removal,Compatible with all silicones Separating agent for an effective isolation of cast forms. Insulates resin (based on methacrylate) against A-silicone. Prevents sticking of the silicone blank to the cast form. Enables an easy removal, equalizes pattern layers in the form. Ready-to-use dipping solution, transparent, for an efficient use in the lab

x3d super lac

£28.00£50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa

3d silicone xsil A LB

£167.00£325.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20

x3d auflex fast

£28.00£50.00
(0 Reviews)
Auflex FAST: General-purpose ear impression silicone with colour change for visual setting check. The colour change from blue to white indicates that the setting process is completely finished and the impression can be removed. Thixotropic, maximum detail reproduction and tear resistance, scanable. Patient-friendly: extra short time in the ear (just 90 sec.!), easy to remove. “See through” cartridge with visual level control. A-silicone, biocompatible, medium viscous. Time in the ear: 1:30 min., final hardness: approx. 30 Shore A, Medical device Class I, Colour: white

x3d model shellac

£28.00£50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  

Back to Top
Product has been added to your cart