solo lac fast
fast setting
One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones).
Smoothing, coating and sealing.
Ideal flow properties, efficient use in the lab, contain no toluene.
Cold curing, high gloss, transparent.
Auflex XLB:
General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip.
Excellent detail reproduction, tensile resistant with high elastic recovery.
Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible.
A-silicone, medium viscosity, time in the ear: 3:00 min.,
final hardness: approx. 37 Shore A, Medical device Class I,
Colour: light blue
3D imrpession material addition cure silicone light body for fine detail
impression material for taking impressions of components
dimensional accurate
fine detail reproduction
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tube
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tub
Property Unit measurement Result
Final Hardness Shore A > 20
DIP
Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath.
Efficient use in the lab, contains no toluene.
Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa
use:
direct fabrication of hard acrylic ear moulds .
Properties:
self curing, fast set, hard transparent or irose tint
self curing resin presented in dual syringe with mixing tips
3D imrpession material addition cure silicone light body for fine detail
impression material for taking impressions of components
dimensional accurate
fine detail reproduction
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tube
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tub
Property Unit measurement Result
Final Hardness Shore A > 20
SUPERa coat
Sealing lacquer with silver particles for silicone based earmoulds and otoplastics.
Suitable for all kinds of silicones, contains no toluene.
Airdrying, excellent adhesion.
If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa
Reviews
There are no reviews yet.