Delivered Free in India

Search

Need help? 0091 - 96502 56987- Xcem3D- 000

In Stock

Engineering SLA Series Tough Clear, 500 g

  • Key Features
    • High impact resistance
    • Good UV and weather resistance
    • Good fatigue resistance
    • Extremely transparent, virtually no discolouration and/or yellowing
    • High dimensional accuracy and low shrinkage
    • Almost odourless processing
    • Compatible with all open-source SLA, DLP and LCD 3D printers in the range of 385 to 405 nm

    Applications

    • Snap connections
    • Tools
    • Functional prototyping
    • Covers
    • Exterior parts
    • Production in small quantities
    • Flawlessly smooth surfaces
    • High precision

 

 

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

x3d super lac

£28.00£50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa

x3d resin primer

£28.00£50.00
(0 Reviews)
use: Bonding of acrylates and silicones Properties: Excellent bonding,Versatile use,Easy handling Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Primer for perfect bonding of acrylates (luxaprint® 3D) and silicones (luxaprint® softseal/softwear 2.0). Easy surface conditioning for reliable adhesion. Versatile use e.g. soft tip application for earmoulds (increased wearing comfort & secure fitting). Application with integrated brush. Transparent

x3d dip lac

£28.00£50.00
(0 Reviews)
DIP Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath. Efficient use in the lab, contains no toluene. Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa

x3d cast separator

£28.00£50.00
(0 Reviews)
use: Separating agent for CAS TINGS/Casting Mould Properties: Dipping solution,Efficient use,Easy removal,Compatible with all silicones Separating agent for an effective isolation of cast forms. Insulates resin (based on methacrylate) against A-silicone. Prevents sticking of the silicone blank to the cast form. Enables an easy removal, equalizes pattern layers in the form. Ready-to-use dipping solution, transparent, for an efficient use in the lab

x3d solo fast

£28.00£50.00
(0 Reviews)
solo lac fast fast setting One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones). Smoothing, coating and sealing. Ideal flow properties, efficient use in the lab, contain no toluene. Cold curing, high gloss, transparent.

x3d model shellac

£28.00£50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  

x3d model hard

£28.00£50.00
(0 Reviews)
3D Model Hard  - Light Cure Indicated for Engineering  3D modelling . Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . lacquers avilable for surface finish MMfree. Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: pink and transparent Property Unit measurement Result Flexural strength MPa > 100 Flexural modulus MPa > 2450 ater solubility µg/mm3 < 1,6 Hardness Shore D > 80

Back to Top
Product has been added to your cart