3D Model Hard - Light Cure
Indicated for Engineering 3D modelling .
Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . lacquers avilable for surface finish
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste. Colour: pink and transparent
Property Unit measurement Result
Flexural strength MPa > 100
Flexural modulus MPa > 2450
ater solubility µg/mm3 < 1,6
Hardness Shore D > 80
Auflex XLB:
General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip.
Excellent detail reproduction, tensile resistant with high elastic recovery.
Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible.
A-silicone, medium viscosity, time in the ear: 3:00 min.,
final hardness: approx. 37 Shore A, Medical device Class I,
Colour: light blue
3D model (soft) L PRINTING RESIN- Light Cure
Indicated for gingival masks making, working and lab models.
good Detail reproduction, Low use of material , fast High building speed, elastic, High mechanical strength . very elastic natural looking
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste.
Colour: pink
Property Unit measurement Result
Tensile strength MPa > 3.5
Tensile strain > 90-95 %
Final Hardness Shore A > 60-70
3D imrpession material addition cure silicone light body for fine detail
impression material for taking impressions of components
dimensional accurate
fine detail reproduction
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tube
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tub
Property Unit measurement Result
Final Hardness Shore A > 20
Auflex JUNIOR:
Precision ear impression silicone for children and teenagers (also suitable for small/ narrow auditory canals).
Low viscous, smooth consistency.
No pressure build-up, no displacement of soft tissue.
The material is stable due to its high thixotropy, no unwanted run-off!
The child material is non-sticky and easy to remove.
Extremely tear resistant, highest elastic recovery from deformation (99.8 %), dimensionally stable.
Extra short time in the ear (2 min.!).
Handy minimix cartridges, easy to use. A-silicone, low viscosity, final hardness: approx. 25 Shore A, Medical device Class I,
Colour: yellow
3D imrpession material addition cure silicone putty
impression material for taking impressions of components
dimensional accurate
fine detail reproduction
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tube
smooth consistency
easy mix soft putty.
choice of working time
putty and catalyst in tub
Property Unit measurement Result
Tensile strength MPa > 3.5
Tensile strain > 90-95 %
Final Hardness Shore A > 60-70
Reviews
There are no reviews yet.