3D DENTAL PRINTING RESIN- Light Cure
Indicated fortransfer tray and bracket positioning, inplant postion tray and indirect bondingn tray.
good Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength .
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste. Colour: clear transparent
Property Unit measurement Result
Hardness Shore A > 90
Tensile strength MPa > 8
Tear strength N/mm > 35
solo lac fast
fast setting
One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones).
Smoothing, coating and sealing.
Ideal flow properties, efficient use in the lab, contain no toluene.
Cold curing, high gloss, transparent.
use:
Separating agent for CAS TINGS/Casting Mould
Properties:
Dipping solution,Efficient use,Easy removal,Compatible with all silicones
Separating agent for an effective isolation of cast forms. Insulates resin (based on methacrylate) against A-silicone. Prevents sticking of the silicone blank to the cast form. Enables an easy removal, equalizes pattern layers in the form. Ready-to-use dipping solution, transparent, for an efficient use in the lab
3D DENTAL PRINTING RESIN- Light Cure
Indicated for casting lab models.
good Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . very elastic natural looking. no residue after burn.
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste.
Colour: pink
Property Unit measurement Result
Flexural strength MPa > 70
Flexural modulus MPa > 1700
Heating temperature 800 °C
3D Model Hard - Light Cure
Indicated for Engineering 3D modelling .
Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . lacquers avilable for surface finish
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste. Colour: pink and transparent
Property Unit measurement Result
Flexural strength MPa > 100
Flexural modulus MPa > 2450
ater solubility µg/mm3 < 1,6
Hardness Shore D > 80
Auflex XLB:
General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip.
Excellent detail reproduction, tensile resistant with high elastic recovery.
Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible.
A-silicone, medium viscosity, time in the ear: 3:00 min.,
final hardness: approx. 37 Shore A, Medical device Class I,
Colour: light blue
Reviews
There are no reviews yet.