use:
swimming plugs, hearing protection
Properties:
Soft flexible,Strong bonding,Easy to clean coating „blue ray“ yellowing protection,Low viscosity,Perfect for dipping
UV one component lacquer for generatively manufactured earmoulds made of luxaprint® 3D flex. Soft surface sealing, high gloss, levelling, easy to clean surface. Low viscosity, perfect for dipping. Protects against dirt and cerumen adhesion, increases the tear resistance of the earmould. Biocompatible, transparent, strong bonding, with „blue ray“ yellowing protection.
3D DENTAL PRINTING RESIN- Light Cure
Indicated for removable dentures. good Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength .
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste. Colour: pink and transparent
Property Unit measurement Result
Flexural strength MPa > 85
Flexural modulus MPa > 1800
Hardness Shore D > 80
DIP
Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath.
Efficient use in the lab, contains no toluene.
Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa
use:
Bonding of acrylates and silicones
Properties:
Excellent bonding,Versatile use,Easy handling
Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection
Primer for perfect bonding of acrylates (luxaprint® 3D) and silicones (luxaprint® softseal/softwear 2.0). Easy surface conditioning for reliable adhesion. Versatile use e.g. soft tip application for earmoulds (increased wearing comfort & secure fitting). Application with integrated brush. Transparent
3D DENTAL PRINTING RESIN- Light Cure
Indicated fortransfer tray and bracket positioning, inplant postion tray and indirect bondingn tray.
good Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength .
MMfree.
Light-curing, resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength, and un influenced by moisture .Resistant to oral conditions, neutral odor and taste. Colour: clear transparent
Property Unit measurement Result
Hardness Shore A > 90
Tensile strength MPa > 8
Tear strength N/mm > 35
solo lac fast
fast setting
One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones).
Smoothing, coating and sealing.
Ideal flow properties, efficient use in the lab, contain no toluene.
Cold curing, high gloss, transparent.
use:
Separating agent for CAS TINGS/Casting Mould
Properties:
Dipping solution,Efficient use,Easy removal,Compatible with all silicones
Separating agent for an effective isolation of cast forms. Insulates resin (based on methacrylate) against A-silicone. Prevents sticking of the silicone blank to the cast form. Enables an easy removal, equalizes pattern layers in the form. Ready-to-use dipping solution, transparent, for an efficient use in the lab
Reviews
There are no reviews yet.