Delivered Free in India

Search

Need help? 0091 - 96502 56987- Xcem3D- 000

10 in stock (can be backordered)

x3d model extra hard

3D DENTAL PRINTING RESIN- Light Cure

Indicated for model making, working and lab models.
good  Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength .

MMfree.

Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste.

Colour: ivory, blue, grey

Property Unit measurement Result

Flexural strength MPa > 75

Flexural modulus MPa > 1400

Hardness Shore D > 85

 

£28.00£50.00

Clear
SKU:xc3-100-1-1-1-1-1-1-2

3D DENTAL PRINTING RESIN- Light Cure

 tough,Biocompatible, fine Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength & autoclave able.

MMfree.

Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of base parts for orthodontic appliances,  also useful for drilling and X-ray templates. . Good Breaking strength, elasticity and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: blue

 

 

shade

A1, A2, A3

size

500ml, 1000

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

x3d dip lac

£28.00£50.00
(0 Reviews)
DIP Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath. Efficient use in the lab, contains no toluene. Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa

x3d cast separator

£28.00£50.00
(0 Reviews)
use: Separating agent for CAS TINGS/Casting Mould Properties: Dipping solution,Efficient use,Easy removal,Compatible with all silicones Separating agent for an effective isolation of cast forms. Insulates resin (based on methacrylate) against A-silicone. Prevents sticking of the silicone blank to the cast form. Enables an easy removal, equalizes pattern layers in the form. Ready-to-use dipping solution, transparent, for an efficient use in the lab

x3d solo fast

£28.00£50.00
(0 Reviews)
solo lac fast fast setting One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones). Smoothing, coating and sealing. Ideal flow properties, efficient use in the lab, contain no toluene. Cold curing, high gloss, transparent.

x3d model shellac

£28.00£50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  

x3d model hard

£28.00£50.00
(0 Reviews)
3D Model Hard  - Light Cure Indicated for Engineering  3D modelling . Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . lacquers avilable for surface finish MMfree. Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: pink and transparent Property Unit measurement Result Flexural strength MPa > 100 Flexural modulus MPa > 2450 ater solubility µg/mm3 < 1,6 Hardness Shore D > 80

3d silicone xsil A soft

£18.00£89.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20

x3d auflex supra

£28.00£50.00
(0 Reviews)
Auflex XLB: General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip. Excellent detail reproduction, tensile resistant with high elastic recovery. Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible. A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I, Colour: light blue

Back to Top
Product has been added to your cart