Delivered Free in India

Search

Need help? 0091 - 96502 56987- Xcem3D- 000

10 in stock (can be backordered)

x3d flex cast

use:

swimming plugs, hearing protection

Properties:

Soft flexible,Strong bonding,Easy to clean coating „blue ray“ yellowing protection,Low viscosity,Perfect for dipping

UV one component lacquer for generatively manufactured earmoulds made of luxaprint® 3D flex. Soft surface sealing, high gloss, levelling, easy to clean surface. Low viscosity, perfect for dipping. Protects against dirt and cerumen adhesion, increases the tear resistance of the earmould. Biocompatible, transparent, strong bonding, with „blue ray“ yellowing protection.

£28.00£50.00

Clear
SKU:xc3-100-1-1-1-1-1-1-3-1-1-1

UV curing premium resin (wavelength 385 nm) for generative manufacturing of hard ITE shells. Markedly lower viscosity than conventional materials (=> reduced loss of material, easier cleaning). Maximum construction safety, even for finest support structures, due to high initial hardness. Very high mechanical flexural strength and fracture resistance, without being brittle. Accelerated throughput by short light exposure times. Biocompatible & Bisphenol A free. Medical device Class IIa, standard colours: beige, black, white, intensive blue, intensive red

Property Standard Unit measurement Result
Flexural strength DIN EN ISO 178* MPa > 70
Flexural modulus DIN EN ISO 178* MPa > 1800
Tensile strength DIN EN ISO 527-1** MPa > 47
Elongation DIN EN ISO 527-1**   > 9%
Hardness   Shore D > 82

 

 

color

transparent blue

size

500ml, 1000

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

x3d auflex supra

£28.00£50.00
(0 Reviews)
Auflex XLB: General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip. Excellent detail reproduction, tensile resistant with high elastic recovery. Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible. A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I, Colour: light blue

x3d model shellac

£28.00£50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  

x3d super lac

£28.00£50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa

x3d auditory mould

£28.00£50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Hearing Protection (passive and solid) Properties: Low viscosity,High initial hardness, Max building speed,Max construction precision, Very high surface hardness, Strong depth curing ,Reduced sedimentation tendency UV curing premium resin (wavelength 385 nm) for generative manufacturing of hard ITE shells. Markedly lower viscosity than conventional materials (=> reduced loss of material, easier cleaning). Maximum construction safety, even for finest support structures, due to high initial hardness. Very high mechanical flexural strength and fracture resistance, without being brittle. Accelerated throughput by short light exposure times. Biocompatible & Bisphenol A free. Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Property Unit measurement Result Hardness Shore D > 84 Flexural strength MPa > 75 Flexural modulus MPa > 1750 Tensile strength MPa > 47 Elongation   > 9%  

x3d auflex fast

£28.00£50.00
(0 Reviews)
Auflex FAST: General-purpose ear impression silicone with colour change for visual setting check. The colour change from blue to white indicates that the setting process is completely finished and the impression can be removed. Thixotropic, maximum detail reproduction and tear resistance, scanable. Patient-friendly: extra short time in the ear (just 90 sec.!), easy to remove. “See through” cartridge with visual level control. A-silicone, biocompatible, medium viscous. Time in the ear: 1:30 min., final hardness: approx. 30 Shore A, Medical device Class I, Colour: white

3d silicone xsil A soft

£18.00£89.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20

x3d dip lac

£28.00£50.00
(0 Reviews)
DIP Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath. Efficient use in the lab, contains no toluene. Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa

Back to Top
Product has been added to your cart