Delivered Free in India

Search

0
Need help? 0091 - 96502 56987- Xcem3D- 000
0

Cart (0)

Need help? 0091 - 96502 56987- Xcem3D- 000
Home>auditory 3D>Ear mould silicones>x3d auflex fast
Awaiting product image
Sale

10 in stock (can be backordered)

x3d auflex fast

Add your review

Auflex FAST:
General-purpose ear impression silicone with colour change for visual setting check.
The colour change from blue to white indicates that the setting process is completely finished and the impression can be removed.
Thixotropic, maximum detail reproduction and tear resistance, scanable. Patient-friendly: extra short time in the ear (just 90 sec.!), easy to remove.
“See through” cartridge with visual level control.
A-silicone, biocompatible, medium viscous. Time in the ear: 1:30 min., final hardness: approx. 30 Shore A, Medical device Class I,
Colour: white

£28.00 – £50.00

A1
A2
A3
500ml
1000
Clear
SKU:xc3-100-1-1-1-1-1-1-1-2-1-1

 

Auflex XLB:
General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip.
Excellent detail reproduction, tensile resistant with high elastic recovery.
Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible.
A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I,
Colour: light blue

shade

A1, A2, A3
size

500ml, 1000

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Quick view
Select options

x3d solo frosty

£28.00 – £50.00
(0 Reviews)
solo lac fast fast setting, non shiny soft surface. One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones). Smoothing, coating and sealing. Ideal flow properties, efficient use in the lab, contain no toluene. Cold curing, high gloss, transparent.
Select options
Quick view
Select options

x3d soft lac

£28.00 – £50.00
(0 Reviews)
SOFT coat Clear varnish for smoothing & equalizing the surface of otoplastics made from silicone (reproduced layer structures due to the generative manufacturing process, surface roughness, etc.). Ideal fl ow properties, brilliant finish, very good adhesion, excellent surface quality, air-drying, toluene-free. Medical device Class IIa
Select options
Quick view
Select options

x3d auditory flex

£28.00 – £50.00
(0 Reviews)
use: swimming plugs, hearing protection Properties: High initial hardness Max building speed Max construction precision with memory effect,Extremely impact resistant,high tear resistance,Fast elastic recovery UV curing resin (wavelength 385 nm) for generative manufacturing of soft, massive earmoulds. High construction precision, maximum building speed. Highest transparency without fillers. High elastic recovery, good tear resistance, dimensional stable. With luxaprint® 3D flex printed earmoulds guarantee a natural wearing comfort: rigid at room temperature, flexible & smooth at body temperature. The earmould always returns to its original shape thanks to the material’s memory effect. luxaprint® flex coat for perfect surface finish. Biocompatible & Bisphenol A free. Medical device Class IIa. Colour: clear Property hardness Result Result Hardness Shore A > 90 at room temperature < 70 at body temperature Tensile strength MPa > 8 > 8 Elongation   > 60 % > 60 % Tear strength N/mm > > 35 without luxaprint® flex coat > 45 with luxaprint® flex coat
Select options
Quick view
Select options

x3d auditory shell coat

£28.00 – £50.00
(0 Reviews)
use: uv cure  shell coat for sealing of printed ear molds high glass hard  scratch resistant shiny Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  
Select options
Quick view
Select options

x3d auditory mould

£28.00 – £50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Hearing Protection (passive and solid) Properties: Low viscosity,High initial hardness, Max building speed,Max construction precision, Very high surface hardness, Strong depth curing ,Reduced sedimentation tendency UV curing premium resin (wavelength 385 nm) for generative manufacturing of hard ITE shells. Markedly lower viscosity than conventional materials (=> reduced loss of material, easier cleaning). Maximum construction safety, even for finest support structures, due to high initial hardness. Very high mechanical flexural strength and fracture resistance, without being brittle. Accelerated throughput by short light exposure times. Biocompatible & Bisphenol A free. Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Property Unit measurement Result Hardness Shore D > 84 Flexural strength MPa > 75 Flexural modulus MPa > 1750 Tensile strength MPa > 47 Elongation   > 9%  
Select options
Quick view
Select options

x3d flex cast

£28.00 – £50.00
(0 Reviews)
use: swimming plugs, hearing protection Properties: Soft flexible,Strong bonding,Easy to clean coating „blue ray“ yellowing protection,Low viscosity,Perfect for dipping UV one component lacquer for generatively manufactured earmoulds made of luxaprint® 3D flex. Soft surface sealing, high gloss, levelling, easy to clean surface. Low viscosity, perfect for dipping. Protects against dirt and cerumen adhesion, increases the tear resistance of the earmould. Biocompatible, transparent, strong bonding, with „blue ray“ yellowing protection.
Select options
Quick view
Select options

x3d audflex M

£28.00 – £50.00
(0 Reviews)
aud flex M Permanently elastic ear mould silicone for indirect fabrication of hearing and splash water protection. For use in conventional or generative manufacturing (e.g. 3D cast technique). Good flow properties, precise detail reproduction, tear resistant, easy processing. High wearing comfort due to soft-flexible fitting. Skin-friendly & biocompatible. A-silicone, light bodied, working time approx. 3:30 min., final hardness: approx. 40 Shore A, Medical device Class I, Colours: blue, red, rose, clear
Select options

Back to Top
Product has been added to your cart
Close