Delivered Free in India

Search

Need help? 0091 - 96502 56987- Xcem3D- 000

10 in stock (can be backordered)

x3d mould direct

use:

direct fabrication of hard acrylic ear moulds .

Properties:

self curing, fast set, hard transparent or irose tint

self curing resin presented in dual syringe with mixing tips

£28.00£50.00

Clear
SKU:xc3-100-1-1-1-1-1-1-3-1

UV curing premium resin (wavelength 385 nm) for generative manufacturing of hard ITE shells. Markedly lower viscosity than conventional materials (=> reduced loss of material, easier cleaning). Maximum construction safety, even for finest support structures, due to high initial hardness. Very high mechanical flexural strength and fracture resistance, without being brittle. Accelerated throughput by short light exposure times. Biocompatible & Bisphenol A free. Medical device Class IIa, standard colours: beige, black, white, intensive blue, intensive red

Property Standard Unit measurement Result
Flexural strength DIN EN ISO 178* MPa > 70
Flexural modulus DIN EN ISO 178* MPa > 1800
Tensile strength DIN EN ISO 527-1** MPa > 47
Elongation DIN EN ISO 527-1**   > 9%
Hardness   Shore D > 82

 

 

color

transparent, transparent rose

size

50ml double barrel syringe

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

x3d solo fast

£28.00£50.00
(0 Reviews)
solo lac fast fast setting One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones). Smoothing, coating and sealing. Ideal flow properties, efficient use in the lab, contain no toluene. Cold curing, high gloss, transparent.

x3d auflex supra

£28.00£50.00
(0 Reviews)
Auflex XLB: General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip. Excellent detail reproduction, tensile resistant with high elastic recovery. Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible. A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I, Colour: light blue

3d silicone xsil A LB

£167.00£325.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20

x3d dip lac

£28.00£50.00
(0 Reviews)
DIP Special dip coat for silicone ear impressions and earmoulds, no annoying skin formation in the dipping bath. Efficient use in the lab, contains no toluene. Low viscosity, cold curing, high gloss, transparent, strong adhesion. Medical device Class IIa

x3d mould direct

£28.00£50.00
(0 Reviews)
use: direct fabrication of hard acrylic ear moulds . Properties: self curing, fast set, hard transparent or irose tint self curing resin presented in dual syringe with mixing tips

3d silicone xsil A soft

£18.00£89.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20

x3d super lac

£28.00£50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa

Back to Top
Product has been added to your cart