Delivered Free in India

Search

0
Need help? 0091 - 96502 56987- Xcem3D- 000
0

Cart (0)

Need help? 0091 - 96502 56987- Xcem3D- 000
Home>auditory 3D>Ear mould silicones>x3d auflex junior
Awaiting product image
Sale

10 in stock (can be backordered)

x3d auflex junior

Add your review

Auflex JUNIOR:
Precision ear impression silicone for children and teenagers (also suitable for small/ narrow auditory canals).
Low viscous, smooth consistency.
No pressure build-up, no displacement of soft tissue.
The material is stable due to its high thixotropy, no unwanted run-off!
The child material is non-sticky and easy to remove.
Extremely tear resistant, highest elastic recovery from deformation (99.8 %), dimensionally stable.
Extra short time in the ear (2 min.!).
Handy minimix cartridges, easy to use. A-silicone, low viscosity, final hardness: approx. 25 Shore A, Medical device Class I,
Colour: yellow

£28.00 – £50.00

A1
A2
A3
500ml
1000
Clear
SKU:xc3-100-1-1-1-1-1-1-1-2-1-1-1

 

Auflex XLB:
General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip.
Excellent detail reproduction, tensile resistant with high elastic recovery.
Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible.
A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I,
Colour: light blue

Bestsellers

Quick view
Select options

x3d model shellac

£28.00 – £50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  
Select options
Quick view
Select options

x3d super lac

£28.00 – £50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa
Select options
Quick view
Select options

x3d auditory mould

£28.00 – £50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Hearing Protection (passive and solid) Properties: Low viscosity,High initial hardness, Max building speed,Max construction precision, Very high surface hardness, Strong depth curing ,Reduced sedimentation tendency UV curing premium resin (wavelength 385 nm) for generative manufacturing of hard ITE shells. Markedly lower viscosity than conventional materials (=> reduced loss of material, easier cleaning). Maximum construction safety, even for finest support structures, due to high initial hardness. Very high mechanical flexural strength and fracture resistance, without being brittle. Accelerated throughput by short light exposure times. Biocompatible & Bisphenol A free. Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Property Unit measurement Result Hardness Shore D > 84 Flexural strength MPa > 75 Flexural modulus MPa > 1750 Tensile strength MPa > 47 Elongation   > 9%  
Select options
Quick view
Select options

x3d auflex fast

£28.00 – £50.00
(0 Reviews)
Auflex FAST: General-purpose ear impression silicone with colour change for visual setting check. The colour change from blue to white indicates that the setting process is completely finished and the impression can be removed. Thixotropic, maximum detail reproduction and tear resistance, scanable. Patient-friendly: extra short time in the ear (just 90 sec.!), easy to remove. “See through” cartridge with visual level control. A-silicone, biocompatible, medium viscous. Time in the ear: 1:30 min., final hardness: approx. 30 Shore A, Medical device Class I, Colour: white
Select options
Quick view
Select options

x3d soft lac

£28.00 – £50.00
(0 Reviews)
SOFT coat Clear varnish for smoothing & equalizing the surface of otoplastics made from silicone (reproduced layer structures due to the generative manufacturing process, surface roughness, etc.). Ideal fl ow properties, brilliant finish, very good adhesion, excellent surface quality, air-drying, toluene-free. Medical device Class IIa
Select options
Quick view
Select options

3d silicone xsil A LB

£167.00 – £325.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20
Select options
Quick view
Select options

x3d auflex supra

£28.00 – £50.00
(0 Reviews)
Auflex XLB: General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip. Excellent detail reproduction, tensile resistant with high elastic recovery. Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible. A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I, Colour: light blue
Select options
Quick view
Select options

x3d model shellac

£28.00 – £50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  
Select options
Quick view
Select options

x3d super lac

£28.00 – £50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa
Select options
Quick view
Select options

x3d auditory mould

£28.00 – £50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Hearing Protection (passive and solid) Properties: Low viscosity,High initial hardness, Max building speed,Max construction precision, Very high surface hardness, Strong depth curing ,Reduced sedimentation tendency UV curing premium resin (wavelength 385 nm) for generative manufacturing of hard ITE shells. Markedly lower viscosity than conventional materials (=> reduced loss of material, easier cleaning). Maximum construction safety, even for finest support structures, due to high initial hardness. Very high mechanical flexural strength and fracture resistance, without being brittle. Accelerated throughput by short light exposure times. Biocompatible & Bisphenol A free. Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Class IIa, standard colours: clear, rose, rose-orange, light beige, blue, red, intensive blue Property Unit measurement Result Hardness Shore D > 84 Flexural strength MPa > 75 Flexural modulus MPa > 1750 Tensile strength MPa > 47 Elongation   > 9%  
Select options
Quick view
Select options

x3d auflex fast

£28.00 – £50.00
(0 Reviews)
Auflex FAST: General-purpose ear impression silicone with colour change for visual setting check. The colour change from blue to white indicates that the setting process is completely finished and the impression can be removed. Thixotropic, maximum detail reproduction and tear resistance, scanable. Patient-friendly: extra short time in the ear (just 90 sec.!), easy to remove. “See through” cartridge with visual level control. A-silicone, biocompatible, medium viscous. Time in the ear: 1:30 min., final hardness: approx. 30 Shore A, Medical device Class I, Colour: white
Select options
Quick view
Select options

x3d soft lac

£28.00 – £50.00
(0 Reviews)
SOFT coat Clear varnish for smoothing & equalizing the surface of otoplastics made from silicone (reproduced layer structures due to the generative manufacturing process, surface roughness, etc.). Ideal fl ow properties, brilliant finish, very good adhesion, excellent surface quality, air-drying, toluene-free. Medical device Class IIa
Select options
Quick view
Select options

3d silicone xsil A LB

£167.00 – £325.00
(0 Reviews)
3D imrpession material  addition cure silicone   light body for fine detail impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Final Hardness Shore A > 20
Select options
Quick view
Select options

x3d auflex supra

£28.00 – £50.00
(0 Reviews)
Auflex XLB: General-purpose impression material, premium quality, soft-smooth initial consistency, thixotropic, does not drip. Excellent detail reproduction, tensile resistant with high elastic recovery. Long-term dimensional stability, scanable, easy processing, skinfriendly & biocompatible. A-silicone, medium viscosity, time in the ear: 3:00 min., final hardness: approx. 37 Shore A, Medical device Class I, Colour: light blue
Select options
Quick view
Select options

x3d model shellac

£28.00 – £50.00
(0 Reviews)
use: ITE Shells In-Ear-Monitoring Earmould Hearing Protection (active) Hearing Protection (passive and solid) Properties: Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Easy to clean surface hardness High surface hardness Strong bonding Very low viscosity “blue ray“ yellowing protection Property Unit measurement Result Hardness Shore D > 80 Flexural strength MPa > 75 Flexural modulus MPa > 1900 Tensile strength MPa > 50 Elongation   > 4 %  
Select options

Back to Top
Product has been added to your cart
Close