Delivered Free in India

Search

Need help? 0091 - 96502 56987- Xcem3D- 000

10 in stock (can be backordered)

x3d dental transfer

3D DENTAL PRINTING RESIN- Light Cure

Indicated fortransfer tray and bracket positioning, inplant postion tray and indirect bondingn tray.
good  Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength .

MMfree.

Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: clear transparent

Property Unit measurement Result

Hardness Shore A > 90

Tensile strength MPa > 8

Tear strength N/mm > 35

 

£28.00£50.00

Clear
SKU:xc3-100-1-1-1-1-1

3D DENTAL PRINTING RESIN- Light Cure

 tough,Biocompatible, fine Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength & autoclave able.

MMfree.

Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of base parts for orthodontic appliances,  also useful for drilling and X-ray templates. . Good Breaking strength, elasticity and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: blue

 

 

shade

A1, A2, A3

size

500ml, 1000

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

x3d super lac

£28.00£50.00
(0 Reviews)
SUPERa coat Sealing lacquer with silver particles for silicone based earmoulds and otoplastics. Suitable for all kinds of silicones, contains no toluene. Airdrying, excellent adhesion. If required, the sealing (e.g. after grinding, cutting) can be repeated again at any time. Medical device Class IIa

x3d dental transfer

£28.00£50.00
(0 Reviews)
3D DENTAL PRINTING RESIN- Light Cure Indicated fortransfer tray and bracket positioning, inplant postion tray and indirect bondingn tray. good  Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . MMfree. Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: clear transparent Property Unit measurement Result Hardness Shore A > 90 Tensile strength MPa > 8 Tear strength N/mm > 35  

x3d cast separator

£28.00£50.00
(0 Reviews)
use: Separating agent for CAS TINGS/Casting Mould Properties: Dipping solution,Efficient use,Easy removal,Compatible with all silicones Separating agent for an effective isolation of cast forms. Insulates resin (based on methacrylate) against A-silicone. Prevents sticking of the silicone blank to the cast form. Enables an easy removal, equalizes pattern layers in the form. Ready-to-use dipping solution, transparent, for an efficient use in the lab

x3d gingiva casting

£28.00£50.00
(0 Reviews)
3D DENTAL PRINTING RESIN- Light Cure Indicated for casting  lab models. good  Detail reproduction, Low use of material , fast High building speed, non-brittle, High mechanical strength . very elastic natural looking. no residue after burn. MMfree. Light-curing,  resin (wavelength 385 nm/405 nm) for the 3D printing of temporary crown and bridges. excellent life like tranlucency and shade and surface finish.. Accurate reproduction with low shrinkage. High early hardness and excellent Breaking strength,  and un influenced by  moisture .Resistant to oral conditions, neutral odor and taste. Colour: pink Property Unit measurement Result Flexural strength MPa > 70 Flexural modulus MPa > 1700 Heating temperature 800 °C  

x3d resin primer

£28.00£50.00
(0 Reviews)
use: Bonding of acrylates and silicones Properties: Excellent bonding,Versatile use,Easy handling Easy to clean surface hardness,High surface hardness,Strong bonding,Very low viscosity,“blue ray“ yellowing protection Primer for perfect bonding of acrylates (luxaprint® 3D) and silicones (luxaprint® softseal/softwear 2.0). Easy surface conditioning for reliable adhesion. Versatile use e.g. soft tip application for earmoulds (increased wearing comfort & secure fitting). Application with integrated brush. Transparent

3d silicone xsil C

£167.00£325.00
(0 Reviews)
3D imrpession material  addition cure silicone  putty impression material for taking impressions of components dimensional accurate fine detail reproduction smooth consistency easy mix soft putty. choice of working time putty and catalyst in tube smooth consistency easy mix soft putty. choice of working time putty and catalyst in tub   Property Unit measurement Result Tensile strength MPa > 3.5 Tensile strain > 90-95 % Final Hardness Shore A > 60-70

x3d solo frosty

£28.00£50.00
(0 Reviews)
solo lac fast fast setting, non shiny soft surface. One-component impression lacquer, for universal finish of all silicone ear impressions (A + C-silicones). Smoothing, coating and sealing. Ideal flow properties, efficient use in the lab, contain no toluene. Cold curing, high gloss, transparent.

Back to Top
Product has been added to your cart