The Engineering LCD Resin – Flex 82A is a rubber-like resin that combines semi-flexibility with strength and whose material properties are similar to those of TPU. With a Shore hardness of 82A, the resin withstands frequent loads from bending and pressure.
Main Features of Engineering LCD Series Flex 82A – Resin
- Material properties similar to rubber
- Good elasticity against bending and compression
- Excellent material properties in terms of cushioning and shock absorption
- Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range of 385 – 420nm
Applications of Engineering LCD Series Flex 82A – Resin
- Custom-fit seals
- Wearables and soft-touch applications
- Mechanical and operational spare parts
- Handles
- Small batch production
Before you start printing
- Shake the bottle for at least 2 minutes before each use
- After shaking the bottle, let the resin sit for 10 minutes to allow air bubbles to escape from the resin.
- Always wear safety glasses and nitrile gloves when handling resin.
Note: The unused resin can be poured back into the bottle after the print is finished.
Post-processing
- The manufacturer recommends post-processing the print in order to achieve the best material properties.
- Rinse your model in IPA or ethanol for about 5 minutes.
- An ultrasonic cleaner is recommended.
- Make sure objects rinsed with IPA and/or ethanol are perfectly dry before further post-curing.
- Place the rinsed parts in a well-ventilated area for at least 30 minutes or use compressed air for at least 2 minutes.
- Cure your object in a high-performance curing chamber for approx. 20-30 minutes at 65 ° C. The preferred curing wavelength is between 300-410 nm.
Reviews
There are no reviews yet.